滇西陇川断陷盆地地热水化学特征及循环过程     

黄琴辉  张华  康晓波  王波  刘海峰  柴金龙  黄钊  王燕 《中国岩溶》2020,39(6):793-801

通过对陇川盆地开展地热地质调查，查清其地热资源分布:盆地内共出露地热点11处，热储结构类型为带状型和层状型，盆地中部为层状型，两侧盆地边缘为带状型，其中北西部受断裂控制明显，南东部受节理裂隙控制明显。其储热层为变质岩及新近系芒棒组的花岗质砂砾岩、细砂岩；地热水受大气降水影响明显，循环深度都在1 600 m以上，大部分在1 800~2 400 m之间，主要来源于深部热源，通过断裂、裂隙及砂砾石孔隙作为导水、储水上涌通道，接收来自山区补给的地下水混合出露于地表，补给距离在1.5 km以上，如南宛河温泉温度最高，地下水循环深度最深，补给距离最远，达10 km；盆地北东和西部水温高，循环深度深。   相似文献   

Using monazite and zircon petrochronology to constrain the P–T–t evolution of the middle crust in the Bhutan Himalaya          下载免费PDF全文

D. Regis  C. J. Warren  C. M. Mottram  N. M. W. Roberts 《Journal of Metamorphic Geology》2016,34(6):617-639

The growth and dissolution behaviour of accessory phases (and especially those of geochronological interest) in metamorphosed pelites depends on, among others, the bulk composition, the prograde metamorphic evolution and the cooling path. Monazite and zircon are arguably the most commonly used geochronometers for dating felsic metamorphic rocks, yet crystal growth mechanisms as a function of rock composition, pressure and temperature are still incompletely understood. Ages of different growth zones in zircon and monazite in a garnet‐bearing anatectic metapelite from the Greater Himalayan Sequence in NW Bhutan were investigated via a combination of thermodynamic modelling, microtextural data and interpretation of trace‐element chemical ‘fingerprint’ indicators in order to link them to the metamorphic stage at which they crystallized. Differences in the trace‐element composition (HREE, Y, Eu_N/Eu*_N) of different phases were used to track the growth/dissolution of major (e.g. plagioclase, garnet) and accessory phases (e.g. monazite, zircon, xenotime, allanite). Taken together, these data constrain multiple pressure–temperature–time (P–T–t) points from low temperature (<550 °C) to upper amphibolite facies (partial melting, >700 °C) conditions. The results suggest that the metapelite experienced a cryptic early metamorphic stage at c. 38 Ma at <550 °C, ≥0.85 GPa during which plagioclase was probably absent. This was followed by a prolonged high‐T, medium‐pressure (~600 °C, 0.55 GPa) evolution at 35–29 Ma during which the garnet grew, and subsequent partial melting at >690 °C and >18 Ma. Our data confirm that both geochronometers can crystallize independently at different times along the same P–T path and that neither monazite nor zircon necessarily provides timing constraints on ‘peak’ metamorphism. Therefore, collecting monazite and zircon ages as well as major and trace‐element data from major and accessory phases in the same sample is essential for reconstructing the most coherent metamorphic P–T–t evolution and thus for robustly constraining the rates and timescales of metamorphic cycles.  相似文献   

Chemical weathering and CO2 consumption in the glaciated Karuxung River catchment,Tibetan Plateau     

Fan Zhang  Xiong Xiao  Lijie Wang  Chen Zeng  Zhengliang Yu  Guanxing Wang  Xiaonan Shi 《水文研究》2021,35(8):e14330

Climate factors play critical roles in controlling chemical weathering, while chemically weathered surface material can regulate climate change. To estimate global chemical weathering fluxes and CO₂ balance, it is important to identify the characteristics and driving factors of chemical weathering and CO₂ consumption on the Tibetan Plateau, especially in glaciated catchments. The analysis of the hydro-geochemical data indicated that silicate weathering in this area was inhibited by low temperatures, while carbonate weathering was promoted by the abundant clastic rocks with fresh surfaces produced by glacial action. Carbonate weathering dominated the riverine solute generation (with a contribution of 58%, 51%, and 43% at the QiangYong Glacier (QYG), the WengGuo Hydrological Station (WGHS), and the lake estuary (LE), respectively). The oxidation of pyrite contributed to 35%, 42%, and 30% of the riverine solutes, while silicate weathering contributed to 5%, 6%, and 26% of the riverine solutes at the QYG, WGHS, and LE, respectively. The alluvial deposit of easily weathering fine silicate minerals, the higher air temperature, plant density, and soil thickness at the downstream LE in comparison to upstream and midstream may lead to longer contact time between pore water and mineral materials, thus enhancing the silicate weathering. Because of the involvement of sulfuric acid produced by the oxidation of pyrite, carbonate weathering in the upstream and midstream did not consume atmospheric CO₂, resulting in the high rate of carbonate weathering (73.9 and 75.6 t km⁻² yr⁻¹, respectively, in maximum) and potential net release of CO₂ (with an upper constraint of 35.6 and 35.2 t km⁻² yr⁻¹, respectively) at the QYG and WGHS. The above results indicate the potential of the glaciated area of the Tibetan Plateau with pyrite deposits being a substantial natural carbon source, which deserves further investigation.  相似文献   

A numerical study of mechanical behavior of a cement paste under mechanical loading and chemical leaching          下载免费PDF全文

Y. Jia  H.B. Bian  S.Y. Xie  N. Burlion  J.F. Shao 《国际地质力学数值与分析法杂志》2017,41(18):1848-1869

Based on relevant experimental data of a petroleum cement paste under mechanical loading and chemical leaching, an elastic‐plastic model is first proposed by taking into account plastic shearing and pore collapse. The degradation of mechanical properties induced by the chemical leaching is characterized by a chemical damage variable which is defined as the increase of porosity. Both elastic and plastic properties of the cement paste are affected by the chemical damage. The proposed model is calibrated from and applied to describe mechanical responses in triaxial compression tests respectively on sound and fully leached samples. In the second part, a phenomenological chemical model is defined to establish the relationship between porosity change and calcium dissolution process. The dissolution kinetics is governed by a diffusion law taking into account the variation of diffusion coefficient with calcium concentration. The chemical model is coupled with the mechanical model, and both are applied to describe mechanical response of cement paste samples subjected to progressive chemical leaching and compressive stresses. Comparisons between experimental data and numerical results are presented.  相似文献   

Effect of grain‐scale pressure variations on garnet growth: a numerical approach          下载免费PDF全文

X. Zhong  J.C. Vrijmoed  L. Tajčmanová 《Journal of Metamorphic Geology》2017,35(1):19-33

  相似文献   

Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications     

Q. Liu  Y.‐B. Wu  H. Wang  S. Gao  Z.‐W. Qin  X.‐C. Liu  S.‐H. Yang  H.‐J. Gong 《Journal of Metamorphic Geology》2014,32(2):177-193

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.  相似文献   

Study of dispersion of mass distribution of ultra-high energy cosmic rays using a surface array of muon and electromagnetic detectors     

《Astroparticle Physics》2015

We consider a hypothetical observatory of ultra-high energy cosmic rays consisting of two surface detector arrays that measure independently electromagnetic and muon signals induced by air showers. Using the constant intensity cut method, sets of events ordered according to each of both signal sizes are compared giving the number of matched events. Based on its dependence on the zenith angle, a parameter sensitive to the dispersion of the distribution of the logarithmic mass of cosmic rays is introduced. The results obtained using two post-LHC models of hadronic interactions are very similar and indicate a weak dependence on details of these interactions.  相似文献   

基于Petri网的地理信息服务组合模型研究     

金宝轩 《测绘科学》2010,35(3):125-128

地理信息服务应用中,单一的功能服务往往无法独立完成复杂的地理信息应用,需要不同粒度的服务组合及协调机制。本文重点研究地理信息服务的组合建模方法,提出基于Petri网的地理信息服务组合建模理论。首先,给出基于Petri网的地理信息服务的定义和图形化描述,然后结合三维地理信息的应用,给出了三维空间分析服务组合的实例分析,最后通过烟草行业的地理信息服务应用验证基于Petri网的服务组合模型的可行性。  相似文献   

Geodynamic modelling of the Century deposit,Mt Isa Province,Queensland     

A. Ord  B. E. Hobbs  Y. Zhang  G. C. Broadbent  M. Brown  G. Willetts 《Australian Journal of Earth Sciences》2013,60(6):1011-1039

This paper is concerned with an example of quantitative modelling of orebody formation as a guide to reducing the risk for future mineral exploration. Specifically, the paper presents a detailed 3–D numerical model for the formation of the Century zinc deposit in northern Queensland. The model couples fluid flow with deformation, thermal transport and chemical reactions. The emphasis of the study is a systems approach where the holistic mineralising system is considered rather than concentrating solely on the mineral deposit. In so doing the complete plumbing system for mineralisation is considered with a view to specifying the critical conditions responsible for the ore deposit occurring where it does and having the size and metal grades that are observed. The numerical model is based on detailed geological, tectonic, isotopic and mineralogical data collected over the past 20 years. The conclusions are that the Century zinc deposit is located where it is because of the following factors: (i) a thermal anomaly is associated with the Termite Range Fault due to advection of heat from depth by fluid flow up the Termite Range Fault; (ii) bedding‐plane fissility in the shale rocks hosting the Century zinc deposit has controlled the wavelength and nature of D₁ folding in the vicinity of the deposit and has also controlled increases in permeability due to hydrofracture of the shales; such hydrofracture is also associated with the production of hydrocarbons as these shales passed through the ‘oil‐window’; (iii) Pb–Zn leached from crustal rocks in the stratigraphic column migrated up along faults normal to the Termite Range Fault driven by topographic relief associated with inversion at the end of the Isan Orogeny; these fluids mixed with H₂S derived at depth moving up the Termite Range Fault to mix with the crustal fluids to precipitate Pb–Zn in a plume downstream from the point of mixing. Critical factors to be used as exploration guides are high temperatures, carbonaceous fissile shales now folded into relatively tight D₁ folds, fault‐controlled plumbing systems that enable fluid mixing, depletion of metals upstream of the deposit and,in particular,a very wide Fe‐depletion halo upstream of the deposit.  相似文献   

泉州湾表层沉积物元素特征及其地球化学意义     

官宝聪  雷怀彦  林炳煌  柳浩然  史跃中  林建宁 《台湾海峡》2010,29(1):58-65

根据2008年泉州湾调查采集的样品，测定了泉州湾表层沉积物中常量元素和微量元素的含量，采用相关分析和因子分析进行元素组合特征的研究，讨论了它们的分布趋势、相互关系和主要来源，并探讨了其地球化学意义．元素相关分析结果表明，泉州湾表层沉积物常量元素与微量元素含量的相关性明显，表层沉积物成分以SiO2和Al2O3为主，其含量的最高值分别达78．39％和22．02％（m／m），其中SiO2与大部分常量元素、微量元素的含量呈负相关，而Fe2O3、MgO、Cu、Co、Ni、Rb、Pb与Al2O3含量之间呈强正相关．元素因子分析表明，泉州湾表层沉积物的物质来源主要有陆源和生物源2种，以陆源的为主．  相似文献